Construction and material decisions
What changes the specification?
Fitment, cap and filling route
Confirm the bore, cap and fitment position together with the filling line. Trial cap torque, fitment weld integrity and dispensing with the real product. A corner spout changes pouring orientation; a centered spout changes filling access. The selected fitting needs a separate dimensioned record.
Dispensing details to add to this record
The opening field reads “Spout Top”. The reference does not provide a numeric fill mass or volume. Add the cap specification, bore and filling method before comparing this reference with another spout pack.
Separate the print web from the sealant
The listed film names need to be turned into a layer-by-layer construction. Identify the outer print web, any barrier component and the product-contact sealant. Agree total gauge and sealing conditions instead of treating a list of polymers as a finished laminate.
Actual catalog differences
Compare the fields, then the image.
These references have a related application or construction. Check their intended contents separately; a shared appearance does not establish interchangeability or better performance.
The alternative image shows two kraft-look refill pouches with white spouts.
FieldSP504SP125
Print / surface referenceGravure PrintingDigital Printing
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows white lavender-themed refill pouches with corner caps.
FieldSP504SP495
Candidate materialPEPE, BOPP, MOPP, kraft paper
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows a white refill pouch and matching white face-wash carton.
FieldSP504SP045
Candidate materialPENylon, PE, PET, PET+NY+PE, PE+PE
Listed gaugeNot supplied100-200mic
Listed fill optionsNot supplied5ml 10ml 20ml 50ml 100ml 250ml 500ml 1000ml 5l
A missing field means the value was not supplied; it does not mean the feature is absent.