Construction and material decisions
What changes the specification?
Fitment, cap and filling route
Confirm the bore, cap and fitment position together with the filling line. Trial cap torque, fitment weld integrity and dispensing with the real product. A corner spout changes pouring orientation; a centered spout changes filling access. The selected fitting needs a separate dimensioned record.
Dispensing details to add to this record
The opening field reads “Zipper Top”. The reference does not provide a numeric fill mass or volume. Add the cap specification, bore and filling method before comparing this reference with another spout pack.
Separate the print web from the sealant
The listed film names need to be turned into a layer-by-layer construction. Identify the outer print web, any barrier component and the product-contact sealant. Agree total gauge and sealing conditions instead of treating a list of polymers as a finished laminate.
Actual catalog differences
Compare the fields, then the image.
These references have a related application or construction. Check their intended contents separately; a shared appearance does not establish interchangeability or better performance.
The alternative image shows a white rectangular refill pouch with a centered black cap.
FieldSP115SP458
Candidate materialHDPEAluminum, PE, PET, VMPET, MOPP, Nylon, MOPP+NY+PE
OpeningZipper TopSpout Top
Listed gaugeNot supplied100-200mic
Listed fill optionsNot supplied3.5g 10ml 25ml 30ml 50ml 100ml 250ml 500ml 1l 5 litre
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows kraft-look spout pouches shown with clear and black variants.
FieldSP115SP270
Candidate materialHDPEKraft Paper+PE, Kraft Paper+VMPET+PE
OpeningZipper TopSpout Top
Listed gaugeNot supplied130-200mic
Listed fill optionsNot supplied10ml 50ml 100ml 250ml 500ml 5 litre
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows a broad blue water-printed bag with a top handle.
FieldSP115SP388
Candidate materialHDPEpe
Print / surface referenceclearOffset Printing
A missing field means the value was not supplied; it does not mean the feature is absent.