Construction and material decisions
What changes the specification?
Bottom gusset and standing space
Check the opened bottom-gusset depth with the actual fill. Width and height alone cannot predict standing stability or usable volume. Confirm the side-seal and top-seal allowances on the drawing, then test how the filled pouch rests and opens during the intended use.
Window placement and print area
This image shows green, yellow and kraft-look spice pouches with product windows. Check how the visible product area will align with the fill level and the approved front-panel artwork. Keep clear areas away from seals and do not infer whole-pack barrier from the printed part of the pouch.
Separate the print web from the sealant
The listed film names need to be turned into a layer-by-layer construction. Identify the outer print web, any barrier component and the product-contact sealant. Agree total gauge and sealing conditions instead of treating a list of polymers as a finished laminate.
Actual catalog differences
Compare the fields, then the image.
These references have a related application or construction. Check their intended contents separately; a shared appearance does not establish interchangeability or better performance.
The alternative image shows black pouches shown with several alternative graphic treatments.
FieldSP099SP029
Candidate materialPEMylar, Bopp/Mopp/PET/PE, kraft, Aluminum Foil
Print / surface referenceAqueous CoatingDigital Printing
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows four plain black zipper pouches shown in graduated sizes.
FieldSP099SP285
Candidate materialPEPE/LDPE/PET
OpeningZipper TopZipper Top / ziplock top
FinishSurface finish to confirmMatte
Print / surface referenceAqueous CoatingGravure Printing
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows green, yellow and kraft-look spice pouches with product windows.
FieldSP099SP410
Candidate materialPEPET+PA+PE
Listed gaugeNot supplied50-200microns
Print / surface referenceAqueous CoatingGravure Printing
A missing field means the value was not supplied; it does not mean the feature is absent.