Construction and material decisions
What changes the specification?
Fitment, cap and filling route
Confirm the bore, cap and fitment position together with the filling line. Trial cap torque, fitment weld integrity and dispensing with the real product. A corner spout changes pouring orientation; a centered spout changes filling access. The selected fitting needs a separate dimensioned record.
Dispensing details to add to this record
The opening field reads “Spout Top”. The reference does not provide a numeric fill mass or volume. Add the cap specification, bore and filling method before comparing this reference with another spout pack.
Metalized layer in the material list
VMPET or a metalized film appears in this reference. Confirm which film is metalized, its layer position and the required barrier results. A metallic surface or product photograph cannot establish oxygen or water-vapor performance.
Actual catalog differences
Compare the fields, then the image.
These references have a related application or construction. Check their intended contents separately; a shared appearance does not establish interchangeability or better performance.
The alternative image shows clear spout pouches displaying milk tea, juice and other colored drinks.
FieldSP161SP266
Candidate materialPET, PE, VMPETPET, PE, Nylon
Listed gauge50-200micronsNot supplied
Print / surface referenceDigital Printing / Gravure printingGravure Printing
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows a white soymilk pouch with a brown cap and green ingredient illustration.
FieldSP161SP269
Candidate materialPET, PE, VMPETPET/AL/PA/PE
Listed gauge50-200micronsTypically 50-200 microns (or customizable upon request)
Print / surface referenceDigital Printing / Gravure printingGravure Printing
A missing field means the value was not supplied; it does not mean the feature is absent.
The alternative image shows two unprinted clear spout pouches with separate white caps.
FieldSP161SP058
Candidate materialPET, PE, VMPETMaterial to confirm
Listed gauge50-200microns0.2mm or Customer's Demands
Print / surface referenceDigital Printing / Gravure printingGravure Printing
A missing field means the value was not supplied; it does not mean the feature is absent.